WATERPROOFING

PRODUCT NAME and DESCRIPTION - Two component, fast curing, bitumen extended polyurethane fluid used for waterproofing and protection in horizontal non-exposed application. It produces a highly elastic membrane with strong adhesion to many types of surfaces and excellent mechanical and chemical resistance properties. - It is based on a pure elastomeric hydrophobic polyurethane resin extended with chemically polymerised virgin bitumen. FEATURES - 1:1 application ratio - Thick, bubble free - Being two component product means that the quantities not mixed can be stored for later use. - Its low modulus gives it excellent substrate crack-bridging properties. - Excellent adhesion on almost any substrate, with or without the use of special primers. - Excellent thermal resistance, the product never turns soft. Maximum service temperature 80°C, maximum shock temperature 200°C. - Resistance in the cold, the film remains elastic even down to -40°C. - Excellent mechanical properties, high elongation, tensile and tear strength, high abrasion resistance. - Good chemical resistance. - Good water vapour barrier properties. COLORS - Black PACKAGING - 40 kilogram per set - Component A: 20kg ; Component B: 20kg VIDEO LINK: https://www.youtube.com/watch?v=5h1OGepb6yk https://www.youtube.com/watch?v=qQX2TuC1V0s https://www.youtube.com/watch?v=Hq6H9vYJsG4

PRODUCT NAME and DESCRIPTION - Single component, 50% aliphatic polyurethane liquid membrane, based on the successful combination of Hyperdesmo and Accelerator 3000 which is fast curing, bubble free thick layer membrane. It cures rapidly to form a completely defect free membrane with excellent mechanical and elastomeric properties. It can now be achieved in only one coat and reduces labor cost. FEATURES - Fast curing, skin formation time of 2 hours. - Bubble and defect free membrane. - Excellent weather, UV and chemical resistance. - Excellent thermal resistance, recommended service temperature 80°C, maximum shock temperature 200°C, the product never turns soft. - Cold resistance, down to -40°C, the film remains elastic. - Moisture vapour transmission, the film breathes so there is no accumulation of humidity under the coat. COLORS - Grey PACKAGING - 25 kilogram per pail VIDEO LINK: https://www.youtube.com/user/alchimicatm

PRODUCT NAME and DESCRIPTION - One component, low viscosity, 50% aliphatic polyurethane fluid which cures with the humidity in the atmosphere to produce a highly elastic membrane with strong adhesion to many types of surfaces. It can be applied without top coat in less traffic requirement. FEATURES - Excellent weather, UV, and chemical resistance - Excellent thermal resistance, maximum service temperature 80°C, maximum shock temperature 200°C, the product never turns soft. - Cold resistance, down to -40°C, the film remains elastic. - Excellent mechanical properties, non-toxic after full cure. - Water vapour transmission, the film breathes so there is no accumulation of humidity under the coat. COLORS - Grey PACKAGING - 25 kilogram per pail VIDEO LINK: https://www.youtube.com/watch?v=VwOq1AHXtf4

PRODUCT NAME and DESCRIPTION - One component polyurethane fluid which cures with the humidity in the atmosphere to produce a transparent membrane, of increased elasticity with uniform adhesion over the entire surface. - It is aliphatic, no yellowing as a result of direct exposure to sunlight. It is ideal for colour protection of HYPERDESMO products. - It is based on pure elastomeric hydrophobic polyurethane resin, which results in excellent mechanical, chemical, thermal, UV and natural element resistance properties. FEATURES - Strong and uniform adhesion on almost any type of substrate. - Highly hydrophobic - Highly durable when exposed to the natural element, maintains its elasticity even down to -40°C - Excellent heat and ultraviolet resistance, it will not yellow, peel or soften up to 80°C - Outstanding resistance to chemicals and mechanical stresses - High tensile strength and abrasion resistance. - Compatible pigment pastes available in many colours. COLORS - Grey PACKAGING - 20 kilogram per pail VIDEO LINK: https://www.youtube.com/watch?v=8CiOSQzbWZ8&t=184s

PRODUCT NAME and DESCRIPTION - Heavy duty, fully aliphatic, polyurethane/polyurea liquid membrane designed for use as a main and/or topcoat for traffic deck coating systems. It incorporates Alchimica's HAA that allows application a single coat and is an excellent way to save on labor costs but also to minimize errors that occur with multi-layer application due primarily to interlayer adhesion failures. - Self-levelling with a good viscosity profile over a large temperature range that will cure to form a bubble free membrane that is recommended to be applied in only one coat. FEATURES - Excellent abrasion, impact and UV resistance. - Excellent mechanical properties, highly elasticity, tensile and tear strength - Excellent chemical and hydrolysis resistance COLORS - Grey PACKAGING - 25 kilogram VIDEO LINK:

PRODUCT NAME and DESCRIPTION - One component, fully aliphatic, polyurethane / polyurea liquid membrane. Upon curing it produces a tough but highly elastic non-yellowing membrane. The product has been developed in order to offer a solution when application requires color stability but also application in one coat. This application in one coat is an excellent way to save on labour but also to minimize errors that occur with multi-layer applications due primarily to inter adhesion failures. - Self-levelling with a good viscosity profile over a large temperature range that will cure to form a bubble free membrane that is recommended to be applied in only one coat. - The product will retain its color stability even when applied in dark colors, especially when applied white it will have excellent solar reflectance for many year. FEATURES - Excellent weather and UV resistance, no yellowing (fully aliphatic) - Low viscosity - Excellent mechanical properties, high elasticity, tensile and tear strength. - Highly hydrophobic - Excellent chemical and hydrolysis resistance. COLORS - Grey PACKAGING - 25 kilogram VIDEO LINK:

PRODUCT NAME and DESCRIPTION - Single component, moisture curing polyurethane/polyurea liquid applied membrane, especially designed for the waterproofing of bridge decks. Displays crack bridging properties over a wide range of extremely high or low temperatures, has excellent resistance to various chemicals as well as to chlorine ion penetration. - The material has thixotropic rheology that allows easy application on slopped and vertical substrates without any sagging. The material contains very low amount of solvent and it is non-flammable and non-IMO during transportation. FEATURES - Excellent crack bridging - Low solvent, non-flammable - Excellent chemical resistance. Can withstand pertochemicals and salts that commonly attack bridge decks. - Thixotropic, can be applied on any complex structure, assuring complete seamless and homogenous covering of uneven concrete surfaces usually encountered on bridge decks. - Excellent mechanical properties, high elasticity, tensile and tear strength. Can withstand the stresses of heavy asphalt application machinery. - Exceptional compatibility with asphalt overlays without needing an adhesion layer - Highly hydrophobic COLORS - Grey PACKAGING - 25 kilogram VIDEO LINK: https://www.youtube.com/watch?v=O7BXsgMPEj8

PRODUCT NAME and DESCRIPTION - Two component, thixotropic coating, based on high quality elastomeric polyurethane resins, solvent free product certified for waterproofing of potable water tanks. - After polymerization it produces a strong, elastic, hydrophobic membrane suitable for waterproofing and protection. FEATURES - Excellent adhesion on almost any type of substrate. - Extremely hydrophobic and hydrolysis resistant. - Allows application on closed spaces, working temperature range from -40°C to 90°C. COLORS - White PACKAGING - 9 kilogram per set - Component A: 1.6kg ; Component B: 7.5kg VIDEO LINK: https://www.youtube.com/user/alchimicatm/search?query=HYPERDESMO+2K-W

PRODUCT NAME and DESCRIPTION AQUASMART DUR-2K - Two component, water based, epoxy coating specially formulated for use in a 1:1 volume ratio. This allows the user to consume even the smallest quantities and store the material for future needs. The viscosity of the material is low and the pot life is long, making it ideal for DIY applications. - Can be easily colored with universal pigment pastes available in hardware stores and can be filled with equal parts of quartz sand giving rise to an excellent protective coating for concrete and metal surface. The material displays very low levels of yellowing upon prolonged exposure to UV. FEATURES - 1:1 application ratio - Quick curing even at lower temperatures - Low-odor, safe and non-flammable (Zero VOC) - Suitable for application in closed spaces. - Easy clean-up - Strong adhesion even on damp or green concrete. Also on iron, galvanized steel, aluminium, glass and wood. - Good mechanical properties and abrasion resstance. - Easy coloring with water based pigment paste. - Visible pot-life. COLORS - Clear PACKAGING - 8 kilogram per set - Component A: 4kg ; Component B: 4kg VIDEO LINK: https://www.youtube.com/watch?v=xOGjnki_Dl0