One-part, Non-Sag Polyurethane Construction Sealant U-Seal 907 is a permanently elastic, one component, gun grade polyurethane construction sealant. It is a low modulus sealant with excellent adhesive properties and resistance to ageing and weathering. U-Seal 907 is designed for the sealing of vertical expansion and construction joints.  Accommodates joint movement of +/- 25%  Permanently elastic over a wide range of temperatures  Easy to gun, easy to tool  Good adhesion on all typical construction materials Certificates and Compliances: ISO 11600/F/25LM, DIN 18540/F, ASTM C920-11 (building construction sealants: classification and requirements) BS 6920-1:2000 (suitability for use in contact with water for human consumption) ASTM C920, Type S, Grade NS, Class 25, Use NT DIN 11431 (various standards on joint sealants)

One-part polyurethane multipurpose adhesive sealant Description U-Seal 540FC is a one-component, gun-grade, non-sag polyurethane high modulus multipurpose sealant. It cures under the influence of atmospheric moisture to form a high performance compound with permanent elasticity and resistance to ageing and weathering. Advantages  Bonds and seals at the same time  Permanently elastic over a wide range of temperatures; accommodates joint movement of ±25%  Non-sag consistency with short cut-off string  Non-sticky / does not pick up dirt  Easy to gun with excellent tooling consistency  Performant adhesion on metal, plastic and construction materials.  Non-staining  Vibration and sound dampening properties  Allows equalised stress transfer due to permanent elasticity.  Good resistance to ageing, weathering and cleansing agents, sea water, lime water  Over-paintable with many water and solvent based paints (preliminary tests recommended) Areas of Application  Sealing and bonding between different materials  Elastic bonding between metal, plastic, glass and other materials  Replaces rivets and mechanical fasteners  Sealing joints in vertical and horizontal applications  Weatherproofing of joints between brickwork, block-work, masonry, wood, concrete, metal frames.  Metal roof and gutter sealing

Polyurethane primerless direct glazing adhesive Description U-SEAL 209 Primerless is an excellent non-sag, one-component, flexible and high performance polyurethane adhesive that cures on exposure to atmospheric moisture to form a tough, durable adhesive. Completely solvent free it is odourless and also non conductive allowing the correct bonding to glass incorporating radio antenna or additional electrical equipment. Can be applied primerless to windshield and painted metal without pretreatments such as black primer and/or activator. Areas of Application U-SEAL 209 Primerless is a versatile elastic polyurethane based Adhesive for the bonding of front, side and rear glasses used in Commercial/Industrial vehicles. Suitable for elastic structural bonding (assembly of various materials which are subjected to high thermal and dynamic stress) in the Transportation Industry. Advantages · Primerless adhesion to windshield and painted metal · One-component Polyurethane · Suitable for cold application · Good stability/workability – non sag · Short cut-off string · Suitable for use with integral aerials. · Prevents contact corrosion in aluminium-body vehicles.

One-part polyurethane construction sealant DIN 18540/F – BS - ISO 11600/F/25LM - BS 6920-1:2000 CERTIFIED Description MEGAFLEX PU25 is a permanently elastic, one component, gun grade polyurethane construction sealant. It cures under the influence of atmospheric moisture to form a low modulus sealant with excellent adhesive properties and resistance to ageing and weathering. Certified according to: ISO 11600/F/25LM and DIN 18540/F Certified according to BS 6920-1:2000 - Suitability for use in contact with water for human consumption Conform to: ASTM 920, ASTM 793-91 and DIN 11431

Description: One-component, non-drying, polybutene-based mastic that does not harden but remains permantly soft. It has excellent resistance to water vapor transmission. Specification: • Moisture resistant • Non-skinning • Excellent adhesion Applications: Well-suited for sealing cold room and other pre-fabricated construction applications. Ideal fot sealing most plastics, metals, glass, masonry and wood. Content: 300 ml Carton Quantity: 24 cartridges/carton

Description: One-component, instant grab adhesive that eliminates the need for mechanical support: bracing, Nailing, screwing, fastening devices. Specification: • Instant grab (No support required) • High strength bonding • Weathering resistant • Primerless bonding on most substrates. Applications: Ideal for outdoor decking, bathroom accessories, paneling, skirting board, window-sells, stripes, thresholds, mirrors and other wall-mounted objects. Content: 290 ml. Carton Quantity: 20 cartridges/ Carton

Description: A heavy-duty construction adhesive formulated for instant grab and holds projects in place instantly, reducing bracing requirement. It bonds most construction materials and will not slump on vertical surfaces. Specification: • Professional Choice • Non-Drip Paste • Instant Grab • Bonds Most Materials Applications: Ideal for bonding most construction materials: wood (wet, treated, etc.), plywood, particleboard, hardboard, metal, concrete, polyurethane foam, stone, ceramic, and most large panel substrates. Content: 300 ml Carton Quantity: 24 cartridges/carton

Description: An elastomeric hybrid sealant based on advanced MS Polymer technology. It is a low-modulus sealant with high movement capability and excellent weathering characteristic. Specification: • ASTM C920 Compliant • ISO 11600 (F Class 25 LM) Compliant • ±50% Movement Capability • Good UV Resistance • Low Static Charge (Less Dirt Streaking) • Silicone-free (Paintable) • Isocyanate-free (No Air Bubbling) • Solvent-free (No Shrinkage) • Reactive Plasticizer (Non-staining) Applications: Sealing concrete joints (precast wall panels, expansion joints, control joints, FRC boards, etc.), façade cladding (metal panels, natural stones, etc.), window frame perimeter, etc. Other applications sealing anodized aluminum, masonry, porcelain, coated metal, finished wood, epoxy and polyester panels, UPVC, polystyrene, and stainless steel. Available Colors: White, grey & black Content: 290 ml (cartridge), 600 ml (sausage) Carton Quantity: 20 cartridges/ carton, 20 sausages/ carton

Description: A high-performance, paste-like construction adhesive specially formulated to bond a variety of construction materials. It will not slump on vertical surfaces. Specification: Mirror and Polystyrene Safe Strong Initial Grab Non-drip Paste Excellent Adhesion on Most Substrates Applications: Ideal for bonding most construction materials: wood, particle board, metal, concrete, fibre-reinforced cement board, ceramics, bricks, flooring panels. Can be used on polystyrene and mirror. Available Colors: Brown Content: 300 ml Carton Quantity: 24 cartridges/carton